Penetration Grade Bitumen

If need help!

+971 54 348 2758

or go to contact form:

Penetration Grade Bitumen: Overview

The penetration quality bitter, often known as the input falls, is measured by a standard penetration testing, is a classification of bitumen based on its hardness or stability. The degree of entry indicates how soft or stiff bitumen is, which helps determine its suitability for specific climate and traffic conditions. The test is performed using a standardized needle under ASTM D5 or similar international standards under controlled load, time and temperature.

The penetration quality bites are widely used in the manufacture of roads, highways and sidewalks and are a basic material for the production of warm mixing asphalt. It ensures structural integrity and durability, and allows it in both flexible sidewalk structure and surface suit.

Important features of penetration class bitumen

Input Price

The primary classification is metric penetration value, which is measured in tenth of a millimeter (DMM). This indicates the depth of which a standard needle enters the bitumen sample. Low penetration values indicate hard bitumen that is suitable for warm climate, while high values indicate soft bitumen that is ideal for cold areas.

Standardized character

Bitumen is available in different penetration characters, such as 20/30, 40/50, 60/70, 80/100 and 100/120, each is sewn for different geographical and project -specific conditions. These characters are defined under global standards such as ASTM D946 and Aashto M20, as well as N12591 in Europe.

Wide range of Price

Depending on penetration quality, this bitumen type is used for surface dressing, road base and layer, asphalt production of warm mixture and sealing of chip. It is also used in the runways and highways to the airport, which is due to its ties and water -repellent properties.

Reliable performance

The penetration class bitumen provides continuous performance under separate load and temperature conditions. Its proven flexibility, adhesion to the set and resistance to deformation means that it goes to materials for long -lasting asphalt sidewalks.

Best Quality
Bitumen

Affordable Cost

Quality. Cost. Trust.

Security measures during handling and transport

Storage security: Always store bitumen in well-ventilated and temperature-controlled tanks to prevent falls and reduce the risk of fire hazards.

Proper marking and PPE use: Make sure all storage units and containers are clearly marked. Workers should wear protective equipment such as gloves, safety glasses, and flame-resistant clothing when handling the hot bitumen.

Transport guidelines: Vehicles used for the transport of bitumen must follow the safety rules. Make sure the spill container systems are in place and materials have the safety data sheet (MSDS).

Insurance and contingency plan: Comprehensive insurance coverage for logistics and a contingency plan for accidents or leaks have been prepared.

Fire prevention: Keep bitumen away from ignition sources. The Flashpoint of the Penetration Bitumen (measured using the Cleveland Open Cup method) is usually above 230 ° C.

Selecting the right penetration character

Choosing the right character of the bitumen for road performance and long life is essential. Factors affecting the choice include:

Climate conditions: Soft characters (eg, 80/100, 100/120) are suitable for cold areas because of their flexibility, while harder grades (eg 20/30, 40/50) work well in warm climates to avoid deformation.

Traffic intensity: Roads with heavy vehicles load roads require bitumen with high viscosity and low penetration values to resist routing and fatigue.

Environmental edges: Bitumen in Paiger Grade should also be chosen on the basis of environmental impact, recycling and compatibility with local materials.

For specialist guidance, you must consult leading bitumen suppliers or asphalt mixers who understand your area's requirements.