Our Bitumen Products
Trusted Bitumen Partner for Road Contractors
BlackRock Bitumen delivers high-quality bitumen products and innovative solutions for construction and infrastructure. With years of experience in supply, manufacturing, and distribution, we’re a trusted partner for road construction, waterproofing, and industrial use.
Below is an overview of every product family we supply. Each family page lists the individual grades with their typical properties, applications and packaging, so your engineers can match a product to the project specification before requesting a quote.
Paving Grades
Superpave PG binders such as PG 70-10 to PG 82-34, specified by the high and low pavement temperatures the binder must handle.
SBS and elastomer-modified binders for heavy traffic, high temperatures and long-life surfacing, including PMB grades to EN 14023 designations.
AH50 to AH130 heavy-traffic paving grades for projects specified to Chinese standards.
Class C170, C240, C320, C450 and C600 binders for projects that follow Australian specifications.
Liquid Binders
Cationic and anionic emulsions in rapid, medium and slow setting grades, including CRS, CSS, RS, MS, SS and high-float grades, for tack coats, chip seals and slurry seals. Our guide to emulsion types explains the differences.
Industrial and Waterproofing Products
Air-blown grades such as 85/25, 90/10 and 115/15, used for roofing, waterproofing, pipe coating and other industrial applications.
Protective coatings for foundations, concrete and steel that need a durable waterproof barrier.
Bitumen-based membranes for roofs, basements and wet areas.
Ready-to-use asphalt for pothole and small-area repairs without a hot-mix plant.
Anti-stripping additive that improves the bond between bitumen and aggregate.
Natural coconut-fibre mesh for erosion control on slopes, embankments and road shoulders.
Packaging Options
We deliver bitumen in versatile, secure options: economical Jumbo Bags, robust steel Drums, or high-volume bulk containers (Bitutainers and Bituboxes). The right choice depends on your order volume, the handling equipment at the destination and how long the product will be stored. Read our comparison of bulk, drum and flexitank shipping for more detail.
How to Choose the Right Product
Start from the specification your engineer or tender document uses. If it names a penetration grade, a VG grade, a PG grade or an EN 14023 PMB designation, that points you to the right family above. Where the specification leaves room for choice, climate and traffic decide: harder binders resist rutting in hot regions and on heavily trafficked roads, while softer binders stay flexible in cold climates. For surface treatments and prime or tack coats, choose between cutback and emulsion based on curing time, weather and site safety rules. Our articles on why grade selection matters and 60/70 vs 80/100 walk through the decision in more detail.
Documents and Quality
Every product is supplied with a technical data sheet (TDS) and safety data sheet (MSDS), and each shipment is backed by a certificate of analysis (COA). Third-party inspection can be arranged on request. If you are working to a tender specification, send it with your enquiry and we will confirm which grade meets it.