Australian standard · AS 2008

Bitumen C320 for general road paving. Exported from Dubai.

A balanced medium-viscosity binder made to AS 2008. For general road paving.

At a glance
AS 2008
260–380 Pa·s
Viscosity at 60°C
0.40–0.65 Pa·s
Viscosity at 135°C
≥ 250°C
Flash point
50,000 MT
Supply capacity per month
HardBitumen C320Soft
Overview

A balanced binder for general road work

Bitumen C320 is an Australian-standard residual bitumen graded by viscosity at 60°C under AS 2008. The class number is the nominal viscosity in pascal-seconds (C320 = about 320 Pa·s).

Its mid-range viscosity balances workability during paving with resistance to rutting in service, which makes it a common choice for general pavement construction.

Black Rock Bitumen supplies Bitumen C320 from Dubai to contractors, EPC companies and asphalt producers across Africa, Asia, Oceania and the Middle East.

  • Balanced viscosity for paving and service life
  • Good adhesion to aggregate
  • Suited to a wide range of road projects
  • Good resistance to cracking and rutting
  • Consistent quality in every batch
Essential details
TypeAustralian standard residual bitumen (AS 2008)
FeedstockCrude oil
HS code27132000
InspectionIncluded
Delivery termsFOB, CFR, CIF
PaymentTT: 30% advance, balance against customs documents (FOB) or B/L draft (CFR/CIF)
MarkingCustomizable on request
Supply capacity50,000 MT per month
PackingNew steel drum; jumbo bag
Need Bitumen C320 for your project?
Tell us the quantity, packing and destination.
Get a Quote
Specification

Bitumen C320 specification

Typical specification for Black Rock Bitumen C320. Each batch is tested before shipment.

PropertyTest methodUnitMinMax
Viscosity at 60°CAS 2341.2Pa·s260380
Viscosity at 135°CAS 2341.2 / 2341.4Pa·s0.400.65
Penetration at 25°C, 100 g, 5 sAS 2341.120.1 mm40–
Flash point (Cleveland open cup)AS 2341.14°C250–
Matter insoluble in tolueneAS 2341.8% mass–1.0
Binder density at 15°CAS 2341.7t/m³1.00–

Tested and certified. Every shipment includes a Certificate of Analysis and MSDS. Batches are tested to AS 2341 methods for viscosity, penetration, flash point and insoluble matter.

Applications

Where Bitumen C320 is used

Typical uses for Bitumen C320.

01

Asphalt paving

Hot-mix base and wearing courses for roads.

02

Surface dressing

Chip seal and spray applications for road surfacing.

03

Low-volume roads

Rural and light-traffic roads.

04

Industrial roads and yards

Ports, container yards and logistics areas.

05

Highways and expressways

Heavy-traffic pavements that need rut resistance.

Related grades

Compare with other Australian standard bitumen grades

See all Australian grades →

Terms of payment

Payment terms for smooth transactions

Two straightforward ways to pay, built for international bitumen trade. Questions about your order or inquiry? Our team will walk you through them.

Get in touch

TT method

The buyer pays 30% in advance, with the balance against the B/L draft (CFR) or customs documents (FOB).

LC at sight

100% irrevocable, non-transferable, confirmed LC at sight, subject to bank approval by Black Rock Bitumen.

Bitumen C320 MSDS

PDF
Bitumen C320 Safety Data Sheet
Download
Our FAQs

Frequently asked questions

Quick answers on Bitumen C320 properties, use and supply.

Looking for reliable Bitumen C320 supply?

Ready to secure your next bitumen shipment?