Home / Oxidized bitumen / Bitumen 115/15
Oxidized bitumen · Air-blown

Bitumen 115/15 for sealing and insulation. Exported from Dubai.

A hard air-blown bitumen with a high softening point and low penetration. For battery and electrical sealing, expansion joints, pipe coating and waterproofing in hot environments.

At a glance
ASTM D36 · D5
110–120°C
Softening point (ASTM D36)
10–20
Penetration, 0.1 mm at 25°C
≥ 250°C
Flash point (ASTM D92)
50,000 MT
Supply capacity per month
HardBitumen 115/15Soft
Overview

Hard, stable and heat resistant

Bitumen 115/15 is a hard oxidized bitumen made by blowing air through straight-run bitumen at controlled temperature. The grade name gives the softening point (115°C) and penetration (15 dmm).

Its rigid structure and low temperature susceptibility keep it stable under heat and mechanical stress, where softer oxidized grades would flow.

Black Rock Bitumen supplies Bitumen 115/15 from Dubai to manufacturers, contractors and EPC companies across Africa, Asia and the Middle East.

  • High softening point
  • Low penetration and rigid structure
  • Resistance to flow and deformation under heat
  • Suited to sealing, insulation and coating use
  • Consistent quality in every batch
Essential details
TypeOxidized (air-blown) bitumen
FeedstockCrude oil
HS code27132000
InspectionIncluded
Delivery termsFOB, CFR, CIF
PaymentTT: 30% advance, balance against customs documents (FOB) or B/L draft (CFR/CIF)
MarkingCustomizable on request
Supply capacity50,000 MT per month
PackingNew steel drum; jumbo bag
Need Bitumen 115/15 for your project?
Tell us the quantity, packing and destination.
Get a Quote
Specification

Bitumen 115/15 specification

Typical specification for Black Rock Bitumen 115/15. Each batch is tested before shipment.

PropertyTest methodUnitMinMax
Specific gravity at 25°CASTM D70–1.001.06
Penetration at 25°C, 100 g, 5 sASTM D50.1 mm1020
Softening point (ring and ball)ASTM D36°C110120
Flash point (Cleveland open cup)ASTM D92°C250–
Solubility in trichloroethyleneASTM D2042wt.%99–

Tested and certified. Every shipment includes a Certificate of Analysis and MSDS. Batches are tested to ASTM methods for softening point, penetration, flash point and solubility.

Applications

Where Bitumen 115/15 is used

Typical uses for Bitumen 115/15.

01

Battery sealing

Sealing compounds for battery casings.

02

Electrical insulation

Insulating compounds, cables and laminates.

03

Expansion joint sealing

Joint fillers and sealants for concrete and bridge decks.

04

Pipe coating

Corrosion-resistant coating for steel pipelines.

05

Waterproofing membranes

Hot-applied and membrane waterproofing for roofs and foundations.

Related grades

Compare with other oxidized bitumen grades

See all oxidized grades →

Terms of payment

Payment terms for smooth transactions

Two straightforward ways to pay, built for international bitumen trade. Questions about your order or inquiry? Our team will walk you through them.

Get in touch

TT method

The buyer pays 30% in advance, with the balance against the B/L draft (CFR) or customs documents (FOB).

LC at sight

100% irrevocable, non-transferable, confirmed LC at sight, subject to bank approval by Black Rock Bitumen.

Bitumen 115/15 MSDS

PDF
Bitumen 115/15 Safety Data Sheet
Download
Our FAQs

Frequently asked questions

Quick answers on Bitumen 115/15 properties, use and supply.

Looking for reliable Bitumen 115/15 supply?

Ready to secure your next bitumen shipment?