Home / Chinese grade bitumen / Bitumen AH110
Chinese grade · AH series

Bitumen AH110 for moderate climates. Exported from Dubai.

A soft penetration-grade binder made to GB/T 15180 for moderate climates.

At a glance
GB/T 15180
100–120
Penetration, 0.1 mm at 25°C
40–53°C
Softening point
≥ 230°C
Flash point
50,000 MT
Supply capacity per month
HardBitumen AH110Soft
Overview

A flexible binder for moderate climates

Bitumen AH110 is a soft penetration-grade bitumen from the Chinese AH series for heavy-traffic road asphalt, made to GB/T 15180. The grade name gives the nominal penetration (AH110 is about 110 dmm at 25°C).

Its higher penetration gives a softer, more flexible binder that is easy to handle and resists cracking in cooler weather. It suits moderate climates and lighter traffic.

Black Rock Bitumen supplies Bitumen AH110 from Dubai to contractors, EPC companies and asphalt producers across Asia, Africa and the Middle East.

  • Higher penetration for flexibility and workability
  • Good resistance to cracking in cooler weather
  • Suited to moderate climates and lighter traffic
  • Easy mixing and laying
  • Consistent quality in every batch
Essential details
TypePenetration grade bitumen (Chinese AH series)
FeedstockCrude oil
HS code27132000
InspectionIncluded
Delivery termsFOB, CFR, CIF
PaymentTT: 30% advance, balance against customs documents (FOB) or B/L draft (CFR/CIF)
MarkingCustomizable on request
Supply capacity50,000 MT per month
PackingNew steel drum; jumbo bag
Need Bitumen AH110 for your project?
Tell us the quantity, packing and destination.
Get a Quote
Specification

Bitumen AH110 specification

Typical specification for Black Rock Bitumen AH110. Each batch is tested before shipment.

PropertyTest methodUnitMinMax
Penetration at 25°C, 100 g, 5 sGB/T 45090.1 mm100120
Softening point (ring and ball)GB/T 4507°C4053
Ductility at 15°C, 5 cm/minGB/T 4508cm100–
Flash point (Cleveland open cup)GB/T 267°C230–
Solubility in trichloroethyleneGB/T 11148wt.%99.0–
Wax contentSH/T 0425wt.%–3.0
Mass loss after TFOTGB/T 5304wt.%–1.2
Penetration ratio after TFOTGB/T 5304%48–

Tested and certified. Every shipment includes a Certificate of Analysis and MSDS. Batches are tested for penetration, softening point, ductility, flash point, solubility and thin-film oven residue.

Applications

Where Bitumen AH110 is used

Typical uses for Bitumen AH110.

01

Asphalt paving

Hot-mix base and wearing courses for roads.

02

Surface dressing

Chip seal and spray applications for road surfacing.

03

Low-volume roads

Rural and light-traffic roads.

04

Crack sealing and patching

Maintenance repair of cracked pavements.

05

Industrial roads and yards

Ports, container yards and logistics areas.

Related grades

Compare with other Chinese grade bitumen grades

See all Chinese grades →

Terms of payment

Payment terms for smooth transactions

Two straightforward ways to pay, built for international bitumen trade. Questions about your order or inquiry? Our team will walk you through them.

Get in touch

TT method

The buyer pays 30% in advance, with the balance against the B/L draft (CFR) or customs documents (FOB).

LC at sight

100% irrevocable, non-transferable, confirmed LC at sight, subject to bank approval by Black Rock Bitumen.

Bitumen AH110 MSDS

PDF
Bitumen AH110 Safety Data Sheet
Download
Our FAQs

Frequently asked questions

Quick answers on Bitumen AH110 properties, use and supply.

Looking for reliable Bitumen AH110 supply?

Ready to secure your next bitumen shipment?